danskenglish
Professional CCTV & Security solutions
Selection

Fiber Media Converter, S/M 20KM, 10/100/1000Mbps

10/100/1000Base-TX to 1000Base-FX Converter

Installation:


1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire
Fiber interface SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
 2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp.
3. Feature
·Auto MDI/MDIX
·Supports over-sized packets up to 1916 bytes
·Plug-and-play operation
·Layer 2 packet switching, store and forward ·Supports Link Fault Pass through (LFP)
·Auto-Negotiation or forced mode
·10/100/1000Base-TX to 1000Base-FX Converter


Datasheet

See more information here


20 pcs. In stock20 pcs. In stock
Manufacturer: Acorid
Product No. AC101